StagePlot Guru

On a mobile device? Get it here Log In Tap Build A Stage Fill Out Stage Information Place Props and Position them to reflect your setup Build Lists if needed Arrange Lists and Document Components Share

This is just one of many different workflows you can use SPG for.

1.) Tap a category > subcategory > scroll through the props in the bottom scroll bar. * The scroll bar will automatically anchor to the props in that category. 2.) Select the prop you wish to use by tapping it. The prop will appear on the canvas. 3.) Drag the prop in the position and lock it down . (Tap twice to pull up the prop action menu). TIP: Position platform props first, then lock them down (double tap > lock). Take advantage of the send-to-back button on each prop to help you position props as you need them.

Double tap any prop to pull up the prop menu. Tap the Delete option. Use the other options to help build. Also See: Placing and Positioning Props

The components of the entire stage plot document are added by default and can be omitted, re-added at any time, or rearranged Arrange Layout tab. The document components on the left side column are all added by default. To rearrange, long press items in the left column and drag each component. That will align your document components to your liking in the final document. Tip- Add a Logo to your plot to personalize it! Go To: Add Logo

Be sure the logo you want to use is saved to your camera roll. Open the tools menu and select add/change logo. Then select the image you'd like to use as your logo in your stage plot. You can Arrange/Delete your logo in the Arrange Layout tab of the Arranger. See Arrange Layout.

We have a vast array of video tutorials available. Check stageplotguru.com. Visit our Tutorial Video section here on the site, or visit our YouTube Channel at Youtube.com/stageplotguru.

When building a plot with many props, if the canvas is too crowded. A couple of things to consider in this case to make navigation a little easier; Prop Locks Lock props in place ---Tap twice to access the context menu and lock the prop into place. This will prevent the prop from moving and allow you to maneuver other props around it. Send To Back Tap the send-to-back icon located on the prop to maneuver props around each other. List Builder Highlight Selector Every item placed on the stage will show up in the List Builder by default. When a prop in the list builder is highlighted, it will also highlight that specific prop on the stage.